| Item | Item description | RRP |
|---|---|---|
| TT1 | Sprintcar Floor Pan Bolt Kit Bolt your floor pan through the chassis and engine plate with hardware that won't add dead weight where you don't need it. Machined from Grade 5 titanium for strength that lasts a full season of hard racing. A clean, race-ready upgrade from heavy steel bolts. Features:
| $70.00 |
| TT2 | Front Wing Mount Bolt – Wide Flange (Pair) A front wing mount bolt with a larger built-in OD flange to spread the load and stop the bolt pulling through the wing. Light, strong and built for the abuse of dirt oval racing. Features:
What's included:
| $17.00 |
| TT3 | Front Wing Mount Bolt (Pair) The standard front wing mount bolt in lightweight Grade 5 titanium. Strong, corrosion-resistant and ready to race. Features:
What's included:
| $16.00 |
| TT5 | Gear Shifter Mount Bolt Kit Keep your gear shifter mounted solid with titanium hardware that shrugs off vibration and saves weight. Features:
What's included:
| $20.00 |
| TT6 | Sprintcar / Midget Top Fuel Tank Plate Kit Make a strong first impression in the pits. This top fuel tank plate kit dresses up the top of the car with titanium bolts and nylon washers for a clean, professional look. Light, neat and built to last. Features:
| $60.00 |
| TT7 | Bell Crank to Throttle Linkage Bolt A single titanium bolt and nyloc to connect your bell crank to the throttle linkage. Small part, big reliability. Features:
What's included:
| $5.50 |
| TT8 | Sprintcar Nerf Bar Bolt Kit Hold your nerf bars on correctly and make them look the part with this complete sprintcar kit. Titanium bolts paired with anodised red aluminium jet nuts for that clean race finish. Confidence your bars stay put, lap after lap. Features:
What's included:
| $80.00 |
| TT9 | Midget Nerf Bar Bolt Kit The complete midget/speedcar nerf bar kit titanium bolts and aluminium jet nuts to keep your bars held correctly with a clean, racey look. Strength and style where it counts. Features:
| $100.00 |
| TT10 | Wing Spud Pinch Bolt A front and top wing pinch bolt set, ideal if your car runs a spud-welded front shock mount. Titanium strength in a light package. Features:
What's included:
| $58.00 |
| TT11 | Rear Wheel Hub Bolt Kit Finish your rims off properly and ditch those ugly steel bolts. This titanium hub bolt kit also strips away all-important rotating weight for better acceleration. Clean look and a real performance gain. Features:
What's included:
| $75.00 |
| TT12 | Sprintcar / Midget Beadlock Bolt Kit One of the most-used bolts on the car, now in lightweight titanium with the washer built in, no more chasing loose washers when you're in a hurry. A must-have for every beadlock wheel. Features:
| $75.00 |
| TT13 | Tail Tank Mount Bolt Kit Mount your tail tank with total confidence using this lightweight titanium bolt set. Features:
What's included:
| $30.00 |
| TT14 | Pitman Arm Bolt A titanium pitman arm bolt with pre-drilled holes to make lock-wiring quick and easy. Features:
What's included:
| $13.00 |
| TT15 | Rear Engine Plate Mount Kit A clean, neat way to mount your engine plate and tidy up the whole engine bay. Titanium button-head bolts, nyloc nuts and washers for a sleek, professional finish. Suits most common chassis. Features:
| $70.00 |
| TT16 | Front Engine Plate Bolt Kit Fix your front engine plate to the chassis tabs with strong, lightweight hardware. Features:
What's included:
| $33.00 |
| TT17 | Rear Engine Mount Kit Bolt your rear engine mount up with titanium hardware that saves weight without giving up strength. Features:
What's included:
| $55.00 |
| TT18 | Rear Engine Mount Kit – Long For chassis that use two long bolts through the top of the chassis rail. A complete titanium rear engine mount. Features:
What's included:
| $60.00 |
| TT19 | Rear Engine Mount Kit – LS The LS-specific rear engine mount kit in lightweight titanium, ready to bolt straight up. Features:
What's included:
| $45.00 |
| TT20 | LS Timing Cover Bolt Kit Tidy up the front of your LS with a full titanium timing cover bolt kit. Clean, light and heat resistance. Features:
What's included:
| $50.00 |
| TT21 | LS- CT525 Header Stud Kit Upgrade your LS or CT525 header setup with the Torque Titanium Header Stud Kit, designed specifically for Speedway racing applications. This kit features a 5/16 UNF thread on the outside, making installation simple while keeping your tool setup fully imperial. Each stud can be screwed into the cylinder head using a 5/32 Allen key, then the header is fitted and secured with the supplied 12-point nuts, tightened using a 7/16 socket. Key Features:
| $130.00 |
| TT22 | Torsion Arm Pinch Bolt Kit A titanium pinch bolt kit to suit both front and rear torsion arms running a 9/16 hex. Light, strong and reusable. Suits front and rear torsion arms. Features:
| $45.00 |
| TT23 | Torsion Stop Adjuster & Nut A titanium torsion bar stop adjuster with a stepped-down nose to make removal easy. Suits common torsion bar stops. Features:
What's included:
| $15.00 |
| TT24 | Front Hub Stud Kit – DMI, Winters, King, TJ Forged & Keizer A titanium front hub stud kit with a flat head, 1/4-drive milled hex and ball-nose tip that clears all types of brake calipers. Suits DMI, Winters, King, TJ Forged and Keizer hubs. Strong, light and easy to fit. Features:
| $100.00 |
| TT25 | Front Hub Nut Kit The titanium nut kit for fixing your front wheels to the hub. Light, strong and built for repeated use. Features:
| $55.00 |
| TT26 | Weld Front Hub Stud Kit A titanium stud kit made specifically for Weld front hubs. Countersunk flat head with a 1/4-drive milled hex and ball-nose tip. Clears all brake calipers. Clean, strong and light. Features:
| $105.00 |
| TT27 | Wing Ram Mount Bolt A single titanium wing ram mount bolt and steel locking jet nut- light, strong and rust-free. Features:
What's included:
| $12.00 |
| TT28 | Tubular Wing Tree Bolt Kit A complete titanium bolt kit to suit your tubular wing tree, including the wing ram bolt. Features:
| $60.00 |
| TT29 | Aero Wing Tree Bolt Kit A titanium bolt kit to suit Aero wing trees. Complete with a front wing ram bolt and 6 Steel locking jet nuts so you can have confidence this kit wont rattle loose! Features
| $60.00 |
| TT30 | Jacobs Ladder Strap Bolt Kit Titanium bolts to hold your straps to the ladder. Paired with anodised red aluminium jet nuts these are sure to look the part while playing a important role. Features:
| $25.00 |
| TT31 | Jacobs Ladder Pin Mount Kit Everything to mount your Jacobs ladder to the chassis, with titanium spacers between the straps so you're not chasing loose spring-style ones. Suits most chassis. Please specify .840" or 1.000" spacer at checkout. Features:
| $52.00 |
| TT32 | Winters Uni Joint Bolt Kit Strip rotating weight off your driveline with this titanium Winters uni joint bolt kit - 12-point heads for solid, repeatable torque. Features:
Recommend tightening to 65ft-lb with a drop of Blue Loctite. | $55.00 |
| TT33 | Rear Shock Studs The Torque Titanium Rear Shock Stud Kit is designed for mounting rear shocks to the torsion arm, with a wide flange for added strength, support, and long-term durability. Each stud features an added shank section to help prevent the shock heim from binding, allowing smoother movement and improved reliability in high-load racing conditions. Supplied as a kit of 2 studs, complete with black steel nuts. Key Features:
| $90.00 |
| TT34 | Radius Rod / Rear Shock Mount Stud (ONS) A one-piece titanium stud made to pass through your chassis to mount radius rods or rear shocks. Features:
What's included:
| $30.00 |
| TT35 | Front Shock Tower Mount Stud (ONS) A titanium stud to pass through your front shock tower and mount your shock. Fits most chassis. Features:
What's included:
| $35.00 |
| TT36 | Radius Rod / Panhard Bolt A lightweight titanium radius rod / panhard bolt. Features:
What's included:
| $16.50 |
| TT37 | Triple X Front Shock Tower Stud (ONS) Titanium studs designed for Triple X cars to mount your front shocks. Features:
What's included:
| $35.00 |
| TT38 | Front Right Steering Arm Bolt Kit A pre-drilled titanium bolt kit for your front right steering arm, ready for lock wire. Features:
What's included:
| $50.00 |
| TT39 | Brake Rotor to Front Hub Bolt Kit A titanium countersunk Allen-head bolt kit to mount your brake rotor to the front hub. Some systems also need a shim washer, (sold separately). Features:
What's included:
| $30.00 |
| TT40 | Front Axle Radius Rod Kit – 9/16 Hex A handy titanium front axle radius rod set. Features:
What's included:
| $46.00 |
| TT41 | Left Front Combo Arm & Brake Mount Kit Tapered-head titanium bolts to mount your left front combo arm and brake caliper bracket. Suits most brake setups. Features:
What's included:
| $50.00 |
| TT42 | Sprintcar Radius Rod Kit A complete titanium kit for mounting all your radius rods front and rear to the chassis, including the panhard bolt. Everything you need in one bag. Features:
| $140.00 |
| TT43 | Speedcar / Midget Radius Rod Kit A complete titanium kit to mount your radius rods to the threads in your chassis and to the front axle, with nuts supplied. All bolts are pre drilled. Features:
| $140.00 |
| TT44 | 3/8 Titanium Washer Made for torsion bar pinch bolts or any other 3/8 bolt that may require a washer. Features:
Specifications:
| $2.80 |
| TT45 | Jacobs Ladder Spacer 1.000" Goes between your ladder straps suits triple x cars. 1.000" wide, 3/8 ID titanium spacer Features:
Sold individually. | $7.00 |
| TT46 | Jacobs Ladder Spacer .840" Fits between your ladder straps suits Maxim, Cool etc. 840" wide, 3/8 ID titanium spacer Features:
Sold individually. | $7.00 |
| TT47 | 1/2 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Light, strong and corrosion-resistant. Features:
Specifications:
| $7.00 |
| TT48 | 1/2 UNF Titanium Shock Mount Jet Nut An ideal way to mount your shocks or radius rods - 9/16 hex, great neat way to secure all your heims. Features:
| $7.00 |
| TT49 | 3/8 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Specifications:
Price is per nut. | $6.00 |
| TT50 | 5/16 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
| $5.00 |
| TT51 | 7/16 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Price is per nut. | $7.00 |
| TT52 | 1/4 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Specifications:
Price is per nut. | $4.50 |
| TT53 | 10/32 UNF Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Specifications:
Price is per nut. | $4.50 |
| TT54 | 1/4 UNC Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Price is per nut. | $4.50 |
| TT55 | 5/16 UNC Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Features:
Price is per nut. | $5.00 |
| TT56 | 3/8 UNC Titanium Nyloc Nut Precision-machined Grade 5 titanium nyloc nut for dirt oval speedway. Light, strong and corrosion-resistant. Features:
Specifications:
Price is per nut. | $6.00 |
| TT57 | 3/8 UNF 12 Point Hex Nut Precision-machined Grade 5 titanium component for dirt oval speedway. Perfect for torque tubes or header nuts. Features:
Specifications:
Price is per nut. | $7.50 |
| TT58 | Aluminium Jet Nuts – Red Anodised Lightweight, compact, and built for secure fastening, these aluminium jam nuts are designed for applications where saving weight matters without compromising reliability. Each nut features the smallest practical hex size for a neat, low-profile fit while maintaining strength and usability. Finished in a red anodised coating, they offer a clean performance look with added surface protection. A built-in self-locking system helps prevent bolts from rattling loose. Available sizes: 10/32 - $2.50 each | $2.50 |
| TT63 | Titanium LF Brake Shim .070" Some brake systems need a spacer between the combo arm and where your brake mount connects. Features:
Specifications:
| $3.80 |
| TT64 | Titanium LF Brake Shim .110" Some brake systems need a spacer between the combo arm and where your brake mount connects. Features:
Specifications:
| $4.00 |
| TT65 | 1/2 Titanium Spacer .125" Precision-machined Grade 5 titanium spacer for dirt oval speedway. Light, strong and corrosion-resistant. Features:
Specifications:
| $4.00 |
| TT66 | 1/2 Titanium Spacer .200" Precision-machined Grade 5 titanium spacer for dirt oval speedway - light, strong and corrosion-resistant. Features:
Specifications:
What's included:
| $4.50 |
| TT67 | 1/2 Titanium Spacer .365" Ideal for getting them heim angles correct Features:
Specifications:
| $5.00 |
| TT68 | 10/32 Titanium Washer Precision-machined Grade 5 titanium washer for dirt oval speedway. Light, strong and corrosion-resistant. Features:
Specifications:
| $2.20 |
| TT69 | 5/16 Titanium Washer Precision-machined Grade 5 titanium washer for dirt oval speedway. Light, strong and corrosion-resistant. Features:
Specifications:
| $2.20 |
| TT70 | Sprintcar Titanium Torsion Stops Our standard sprintcar titanium torsion stop for a 1-3/4" tube split. Comes complete with bolts, ready to fit. Features:
| $150.00 |
| TT73 | Stagger Tape Every team needs a few of these in the trailer or mule. Quick, accurate stagger measurement when you need it. Features:
What's included:
| $8.00 |
| TT74 | Titanium Rock Screen Protect yourself from flying dirt and debris with a lightweight titanium rock screen - tough, light and built with quality. Features:
What's included:
| $130.00 |
| TT75 | Titanium Rock Screen Clamp A titanium rock screen clamp complete with bolts to mount your screen securely. Features:
What's included:
| $50.00 |
| TT76 | Aluminium Jet Nut Master Kit A complete aluminium jet nut kit covering the most-used UNF sizes on the car - sorted, light and ready in the trailer or mule. The easy way to never be caught short. What's included:
| $285.00 |
| TT77 | Titanium Nyloc Nut Master Kit A complete titanium nyloc nut kit spanning the sizes you use most. Big weight saving and one box that covers the whole car. Stock the trailer once and forget about it. What's included:
| $380.00 |
| TT78 | Wilwood Front Caliper Mount Kit Mount your Wilwood front calipers with lightweight titanium hardware. Features:
What's included:
| $21.00 |
| TT79 | Wing Valve Mount Bolt Kit Mount your wing valve neatly and securely with this lightweight titanium bolt set. Features:
What's included:
| $20.00 |
| TT80 | 1/2 UNF Steel Nyloc Half Nuts Precision-machined nyloc half nut for dirt oval speedway. Solid and reliable. Features:
What's included:
| $1.00 |
| TT83 | 1/2 UNF Stud (ONS) – 2.000" Overall, 0.750" Thread A one-piece titanium stud with a 3/4 hex in the centre, 2.000" overall with a 0.750" through thread. Features:
| $18.00 |
| TT84 | 410 Sprintcar Header Nut Kit A 12-point titanium nut kit to mount your headers on a 410 - light, strong and heat-resistant. Features:
What's included:
| $95.00 |
| TT85 | 1/2 UNF Shock / Radius Rod 9/16 Hex Nut – 10 Pack A handy 10-pack of titanium 1/2 UNF 9/16 hex nuts for shocks and radius rods. Features:
What's included:
| $70.00 |
| TT86 | 7" Titanium Jacobs Ladder Strap Keep your rear end as strong as possible with our titanium ladder straps - a tough alternative to aluminium that bends before it breaks, letting you finish the race and not stuck on the infield! Sold individually. Features:
| $40.00 |
| TT87 | Steering Wheel Bolt Kit A titanium steering wheel bolt kit - light, strong and a clean finish right in front of you. Features:
What's included:
| $20.00 |
| TT88 | CLEAR SAFETY GLASSES Ideal for the race track, workshop and everyday use. These safety glasses are the perfect edition for your track bag. | $10.00 |